

Product Category

Electrical Discharge Machining is a kind of mechanical processing equipment, It widely used in the manufacture of various metal molds and precision Hardware.
1:The product is constantly being developed and updated,and the latest information shall prevail.
2:The product parameters are standard configurations.For other configurations,please call to inquire.
TJ-ZNC450 Mechanical Parameter  | |||
No.  | Item  | Unit  | Value  | 
1  | Working table size (LxW)  | mm  | 700×400  | 
2  | Working oil tank size(L×W×H)  | mm  | 1130×710×450  | 
3  | AXIS-X Stroke  | mm  | 450  | 
4  | AXIS-Y Stroke  | mm  | 350  | 
5  | SERVO stroke(Z1)  | mm  | 200  | 
6  | Nose stroke (Z2)  | mm  | 200  | 
7  | Maximum Distance From Spindle End Face to Worktable  | mm  | 480  | 
8  | Maximum Electrode Weight  | kg  | 120  | 
9  | Maximum Working Weight  | kg  | 1200  | 
10  | Mechanical Weight  | kg  | 1550  | 
11  | Packing Size(L×W×H)  | mm  | 1470×1150×1980  | 
12  | Filtration tank Size(L×W×H)  | mm  | 1250×850×500  | 
13  | Filtration Tank Capacity  | L  | 400  | 
Specification of TJ-ZNC450 Electrical cabinet .Taiwan CTEC controller  | |||
No.  | Item  | Unit  | 50A.Technical Specifications  | 
1  | Maximum working current  | A  | 50  | 
2  | Maximum machining speed  | mm3/Min  | 735  | 
3  | Minimum Electrode Consumption Ratio  | %  | 0.1  | 
4  | Optimum Surface Accuracy(Ra)  | um  | 0.8  | 
5  | Weight of Electric Cabinet  | kg  | 300  | 
6  | Total Power  | KVA  | 5  | 
6  | Size of Electrical Cabinet  | mm  | 900×730×1800  | 
The company reserves the right to change the design of the specifications. The above specifications are subject to change without prior notice.  | |||